Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Lemont
Chimney repair in Lemont typically runs $650-$4,200 depending on whether you need mortar repointing, spalling brick repair, or a partial rebuild, and most jobs are scheduled within a week during the off-season and two weeks once heating demand picks up in October. Our Chimney Repair team coordinates dispatch from our Chicago office and routes crews daily through Lemont, from the historic district off State Street to the newer tracts near 127th Street and the rural properties out toward the Cook County line. If you’re seeing white chalky flaking, missing mortar, or water stains on your ceiling below the chimney, call (815) 620-5234. We’ll send a written price before any work starts, and every inspection includes a camera scan down the flue with a documented photo record.
Why Level Two Chimney Joliet Is Lemont’s Preferred Chimney Repair Company
We’ve completed more than 38,000 Chimney Cleaning & Sweep - Lemont jobs and inspections since 2009, and a growing share of them now come from Lemont homeowners who found us after a competitor’s “inspection” missed what our camera caught. The difference is Clause 4 of the Haven Standard: a documented photo record on every visit, not a flashlight glance and a verbal report.
Our technicians are background-checked, uniformed, and licensed. You get a named tech assigned to your job, a text when they’re on the way, and a written scope, written price, and written warranty before anyone touches your chimney. Corrine Halstead built this practice into the company from day one.
We answer calls live, 24 hours a day. No voicemail, no callback tomorrow. For Chimney Repair in Lemont, that matters when you smell smoke where it shouldn’t be or spot new water damage after a valley thunderstorm.
Our 365-Day Done Right Promise means if the repair fails, we make it right. No chargebacks, no arguments. It’s stamped on every job under the Haven Standard.
Our Chimney Repair Services in Lemont

Chimney Rebuilding
Full or partial chimney rebuilding in Lemont starts around $3,800 for a above-the-roof teardown and rebuild, and runs to $8,500+ for a full-height stack on a historic home with dolomite coursing. The soft Niagaran dolomite quarried from Lemont’s own bluffs, the same stone that built the Chicago Water Tower, erodes differently under flue-gas acid and freeze-thaw cycling than standard fired brick. We’ve rebuilt chimneys near the I&M Canal corridor where the original stone had spalled so badly the flue was structurally compromised. We source replacement materials through our Haven buying network, matching lime content and compressive strength to the original masonry rather than slapping on Portland cement that traps moisture and accelerates deterioration.

Mortar Repointing
Repointing in Lemont runs $650-$2,400 depending on access, scaffold needs, and how many courses need grinding out. The valley fog that pools in the Des Plaines River valley keeps mortar joints damp longer than in flatland suburbs like Bolingbrook, so freeze-thaw cracking happens faster here. We grind joints to proper depth, match new mortar to the existing compressive strength and permeability, and finish with a brush strike that sheds water. On historic dolomite chimneys, we use a lime-rich mix that breathes with the stone. Clause 1 of the Haven Standard requires the written price and scope before work starts, so you’ll know exactly which courses we’re repointing and why.

Chimney Waterproofing
Waterproofing a Lemont chimney typically costs $480-$1,100, including cleaning, minor crack repair, and application of a vapor-permeable silane/siloxane sealant. We use Gelco and Copperfield formulations procured through our Haven buying network. The sealant lets moisture escape from inside the masonry while blocking liquid water from entering. This is critical in Lemont’s humid valley microclimate, where morning fog sits heavy on rooflines half the year. We never recommend waterproofing over active leaks without first identifying the source, camera-scanning the flue, and documenting crown and flashing condition. A sealant on a chimney with a failed crown just traps water inside.

Spalling Brick Repair
Spalling repair in Lemont ranges from $320 for localized brick replacement and spot repointing to $1,800+ for multiple courses on a deteriorating stack. Spalling, the flaking and crumbling of brick or stone faces, accelerates in our climate when moisture penetrates the masonry and freezes. On Lemont’s historic chimneys, what looks like spalling brick is often spalling dolomite, a softer stone that flakes in thinner, more irregular layers than clay brick. Our camera inspection distinguishes stone loss from surface staining before we recommend any repair. We replace with matched materials from Olympia Chimney and Copperfield inventories sized to Lemont’s common flue dimensions.

Flashing Repair
Flashing repair runs $380-$920 in Lemont, including removal of old step and counterflashing, inspection of the deck and underlayment, and installation of new galvanized or copper flashing with proper overlap and sealant. Valley wind patterns in Lemont can lift poorly seated flashing faster than in more sheltered suburbs. We document the surrounding roof condition with photos and note any decking softening that needs addressing before new flashing goes in.

Tuckpointing
Tuckpointing, the decorative and functional restoration of fine mortar joints, runs $850-$2,800 on Lemont’s historic masonry. We match color and profile to existing work, grinding out only what’s failed rather than full-course repointing where it’s unnecessary.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Lemont
We stock parts and materials from DuraFlex, HeatShield, and Copperfield, procured through the Haven buying network specifically to keep customer prices honest. For Lemont’s mix of historic masonry and prefabricated metal-insert chimneys, that means we can source a HeatShield cast-in-place flue liner for a wood stove in a dolomite stack, or a DuraFlex stainless liner for a zero-clearance firebox, without the delay of special-ordering from a distant warehouse. Our Chicago office maintains inventory for same-week installation on most standard repairs. When we rebuilt that 1890s chimney off State Street, the HeatShield liner was on the truck the next morning.
Common Chimney Repair Problems We See in Lemont Homes

- Soft dolomite misread as soot damage. On a call off State Street near the I&M Canal corridor, we found the 1890s dolomite chimney carrying a wood stove whose glazed second-degree creosote had soaked into spalled mortar joints the homeowner had read as soot staining. We repointed with a lime-matched mortar, installed a HeatShield-cast flue liner sized to the stove’s draft, and set a new crown and cap, and the owner has since moved his sweeping interval to every cord burned, not every fall.
- Wood-stove creosote glazing in rural properties. Homes on the Lemont outskirts that burn wood as primary heat load creosote far faster than suburban fireplace users. Second-degree buildup glazes into third-degree tar that no brush can touch, and the glazed layer insulates the flue, dropping draft and increasing the risk of a chimney fire. These chimneys need inspection every cord, not every calendar year.
- Zero-clearance chimneys treated as masonry. The 1980s-2000s tract homes near 127th Street and the newer subdivisions have prefabricated metal-insert fireboxes with factory-built chimney systems. They need liner and smoke chamber inspection, not tuckpointing. We’ve seen competitors quote full masonry repointing on systems that have no masonry to repoint.
- Valley moisture accelerating mortar decay. The Des Plaines River valley traps fog and elevates humidity around chimney stacks compared to flatland suburbs. Damp joints freeze harder and more often, opening hairline cracks that become finger-width gaps in two or three seasons. Annual inspection catches this before rebuild territory.
Pricing for Chimney Repair in Lemont, IL
| Service | Typical Range in Lemont |
|---|---|
| Mortar repointing (partial) | $650 - $1,400 |
| Mortar repointing (full above-roof) | $1,800 - $2,400 |
| Spalling brick or stone repair | $320 - $1,800 |
| Chimney waterproofing | $480 - $1,100 |
| Flashing repair | $380 - $920 |
| Tuckpointing (historic) | $850 - $2,800 |
| Partial chimney rebuild | $3,800 - $6,200 |
| Full chimney rebuild | $6,500 - $8,500+ |
What moves you up or down within these ranges: scaffold requirements on steep roofs, access for material staging on tight Lemont lots near the historic district, the extent of hidden damage revealed only after camera inspection, and whether matching historic dolomite requires custom sourcing. We deliver a written price before any work starts, Clause 1 of the Haven Standard, with no exceptions. Bring us a competitor’s written estimate and we’ll give you a free second opinion. Estimates are free. Call (815) 620-5234.
We Also Serve Cities Near Lemont

Our crews route through Lemont daily and also handle chimney repair in Darien, Bolingbrook, Romeoville, and Downers Grove. Dispatch and scheduling are coordinated from our Chicago office. Rural properties outside Lemont’s village limits are absolutely in our service area, though drive time affects scheduling, and we book those jobs with buffer for weather and road conditions.
Serving Lemont, IL - Our Local Coverage Area
We’re based in the Lemont area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Repair in Lemont

Every cord of wood burned, not every fall. A wood stove running as primary heat in a Lemont rural property loads creosote at three to four times the rate of a suburban fireplace used Saturday evenings. Glazed second-degree creosote can harden to third-degree tar in a single season, and no brush removes that. We inspect and sweep on a per-cord schedule, camera-scanning the flue each time to catch spalling or liner damage before it becomes a rebuild. Call (815) 620-5234 to book - estimates are free.
Probably not. On Lemont’s historic chimneys, white chalky flaking is often spalled Niagaran dolomite, the soft local limestone used in original construction and repointing, not surface soot at all. Flue-gas acid and valley freeze-thaw erode this stone differently than standard brick, producing thin, irregular flakes that collect on the roof like ash. A quick flashlight look won’t distinguish stone loss from staining. Our NFPA 211 Level 2 camera inspection identifies what’s actually failing before we recommend any repair. Call (815) 620-5234 for an exact diagnosis - estimates are free.
Lemont’s valley topography traps moisture and morning fog, keeping masonry damp longer than flatland suburbs. More moisture cycles through the brick or stone, more freeze-thaw expansion cracks the mortar, and more flue-gas acid condenses in the cooler, wetter stack. Your sister’s Bolingbrook chimney dries faster after rain and runs warmer, slower to develop the joint deterioration we see regularly in Lemont. Annual inspection and proper waterproofing matter more here. Call (815) 620-5234 to schedule - estimates are free.
No. Prefabricated zero-clearance fireboxes have metal chimneys with factory-specified liners and termination caps, not masonry stacks. Tuckpointing or brick replacement is the wrong repair entirely. What these systems need is liner inspection for corrosion or separation, smoke chamber evaluation, and proper clearances to combustibles. We’ve seen Lemont homeowners quoted thousands in masonry work on systems with no masonry. Our camera inspection identifies exactly what you have and what it actually needs. Call (815) 620-5234 - estimates are free, and we offer a free second opinion on any competitor’s written quote.
Yes. We service wood-stove-primary homes on the Lemont outskirts and in unincorporated areas west and south of the village. Scheduling includes drive-time buffer, and we confirm routes the morning of. Rural properties often need more frequent inspection due to heavier creosote loading, and we’re equipped for longer service calls with full material loads on the truck. Call (815) 620-5234 to discuss your location and book - estimates are free.
Written by Corrine Halstead, Owner at Level Two Chimney Co., serving Lemont since 2009 under the Haven Standard.





Before
After
Before
After
Before
After